
Adhesive 62Q
Permanent adhesive, acrylic based, compostable for home and garden composting
Technical data
Tack | high | |
Peel adhesion | high | |
Shear | very high | |
Minimum application temperature | -5 °C | |
Service temperature | -10 to 60 °C |
Application and use
The pressure-sensitive adhesive 62Q has been specially developed for direct food labelling. In addition, Adhesive 62Q can also be used on compostable packaging materials. Slight condensation on the packaging film should not present a problem.
The pressure-sensitive adhesive 62Q in combination with the label materials HERMAextracoat (242) and HERMAtherm Bio (909) has been certified as compostable materials for home and garden composting (2021-2) by DIN CERTCO GmbH according to NF T51-800:2015. The certificates are valid until 31.01.2029.
Processing
The die-cutting properties are good on all conventional machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
All ingredients of the pressure sensitive adhesive 62Q comply with the recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives).
The pressure-sensitive adhesive 62Q can be safely used for the back coating of labels for the labelling of foodstuffs for storage at room temperature and below. It may be used in direct contact with dry, moist and fatty foodstuffs that can be assigned a correction factor of at least 2 in accordance with Regulation (EU) No. 10/2011 (Declaration of no objection valid until 16.01.2027).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable but do not constitute a guarantee or warranty.
We give no guarantee as to the suitability of the product for a specific application, this shoul be tested by the user.
Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0