Digital vehicle model

Self-adhesive Materials for the automotive and electrical industry

Abrasion-resistant, heat- and chemical-resistant self-adhesive labels for the permanent marking of components, equipment and machinery.

Requirements for adhesive materials in the automotive and electrical industries

The requirements in the automotive and electrical industries are particularly high and varied. The labelling of machinery, equipment and technical components takes place under the most extreme conditions. Our adhesive materials are abrasion-resistant and resistant to heat and chemicals. The labels maintain optimum adhesion even in the presence of moisture and significant temperature fluctuations. This is made possible by an adhesive laminate in which the label material, adhesive and backing material are precisely matched. As a result, markings remain permanently adhered and legible even under extreme stress.


HERMA adhesive materials with UL certification
 

UL Solutions is an independent testing and certification organisation based in the USA. UL Solutions assesses whether products comply with the applicable consumer protection standards. UL approval is one of the most important criteria for supplying the electrical and automotive industries in the USA. HERMA offers a range of certified adhesive laminates that comply with the UL 969 standard for marking and labelling systems. You can find all material combinations in the overview of UL-approved adhesive laminates. With these adhesive laminates, you fulfil a key requirement for supplying the US market.

Specific requirements and applications

Every application in the automotive and electrical industries places its own demands on the adhesive material. An engine compartment sticker must withstand heat and oil, whilst a type plate must remain legible for years. HERMA therefore tailors the label material and adhesive to the specific application. This ensures you receive the right adhesive composite for every labelling task.


Individual requirements

  •  UL approval in accordance with UL 969
  • Seawater resistance in accordance with BS 5609, Sections 2 and 3
  •  REACH-compliant
  • RoHS-compliant

Typical Applications 

  •  Barcode labels
  • Paint mask labels
  • Engine compartment labels
  • Product labels
  • Security labels
  • Tamper-evident labels (original closure)
  • Transport labels
  • Rating plates
  • Equipment and machinery labels
  • Cable tag labels
  • VDA labels

Properties of adhesive composites 

  • High scratch and smudge resistance
  • Resistant to oils and moisture
  • Temperature resistance
  • Adhesion to rough surfaces
  • Very good thermal transfer printability

Our solution for you: adhesives for challenging surfaces

Thanks to its wide range of adhesive types, HERMA is able to offer you the right adhesive for even the most demanding applications. The range for the automotive and electrical industries extends from removable adhesives through to highly permanent and extra-permanent adhesives. UV-cured acrylic adhesives, in particular, are heat-resistant and offer extremely high adhesion on heavily curved, rough, dusty and oily surfaces. This means your label will adhere reliably even where standard adhesives reach their limits.

Carbon bumpers for a vehicle, including a front bumper and side panels, with labels for identification.
A blue drill lies next to two brake discs. The drill has a handle and a rotating tip for various applications.
Transparent depiction of a car showing the internal components and chassis, including the engine and drivetrain. Parts labeled accordingly.
Internal components of a mobile phone, including the camera, SIM card slot, and motherboard.

A list of all adhesive composites suitable for the automotive & electrical industry can be found in our product catalogue on page 30.

Catalogue

Frequently asked questions about adhesive materials for the automotive and electrical industries

  • What does UL approval mean for adhesive materials?

    UL approval confirms that an adhesive composite complies with the UL 969 standard for marking and labelling systems. UL Solutions tests whether markings remain permanently adhered and legible under specified stresses. UL approval is one of the most important criteria for supplying the electrical and automotive industries in the USA. HERMA offers seven adhesive laminates with UL approval, all featuring the 63B pressure-sensitive adhesive. With these adhesive laminates, you fulfil a key requirement for the US market.

  • Which adhesive systems are suitable for labels in the engine compartment?

    Nine self-adhesive laminates from our range are suitable for labels in the engine compartment. Six of these are PETP films, along with the HERMA PE Laser (10475) PE film and two variants of HERMAprintex. All nine adhesive laminates are resistant to oil and moisture, whilst the PETP films and HERMA PE Laser are also temperature-resistant. For engine compartment labels that need to withstand heat and oil over the long term, the PETP films are therefore the first choice.

  • Which adhesive laminates can I print on using thermal transfer, laser or inkjet printing?

    Thermal transfer printing can be used on 31 of the 37 self-adhesive laminates in our range for the automotive and electrical industries. Five self-adhesive laminates are available for laser printing: two PE films, two PETP films and one HERMAprintex variant. HERMA PP inkjet white matt (15343) is suitable for inkjet printing. You should therefore select the self-adhesive composite that is compatible with the printing system you are using to print the label.

  • Which adhesive will adhere to rough, oily or curved components?

    UV-cured acrylic adhesives adhere particularly well to rough, oily or curved components. They are heat-resistant and offer extremely high adhesion even on dusty surfaces. All 13 adhesive combinations that we recommend for rough substrates use highly permanent or extra-permanent adhesives. On critical component surfaces, the adhesive therefore determines whether the label will adhere permanently.

  • Can I test the adhesive material on my customer’s component beforehand?

    You can test the adhesive material in advance on your customer’s component. Use the ‘Request Samples’ form to receive samples of the desired adhesive assemblies. This allows you to check adhesion and printability under real-world conditions before going into mass production. Testing on the original component therefore gives both you and your customer confidence in approving the material..

Your request to HERMA self-adhesive material