HERMA PE transparent tc (862)
Transparent, glossy polyethylene film with topcoat
Technical data
| Grammage | approx. 77 g/m² | ISO 536 |
| Caliper | approx. 80 µm | ISO 534 |
| Tensile stress MD | approx. 20 N/mm² | ISO 527 |
| Tensile stress CD | approx. 19 N/mm² | ISO 527 |
| Surface gloss Angle: 60° to the perpendicular | approx. 75 GU | ISO 2813 |
| Transparency | approx. 90 % | DIN 53147 |
Application and use
Thanks to its special topcoat the glossy surface of HERMA PE transparent tc gives a good print quality in conventional printing processes like e.g. UV flexo printing.
ERMA PE transparent tc can be used to produce visually demanding, glossy, transparent labels. For recycling reasons these labels are preferably used on PE surfaces.
Thanks to the high flexibility of this material even curved surfaces and deformable packaging may be labelled without any problems.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
